2 1/2" Goyen Type CA62T Pulse Jet Valve
Description of Pulse Valve Blow Spay Diaphragm of CA62T:
| No. | Name |
| 1 | Compressed air jet tube |
| 2 | Clean gas exports |
| 3 | Filter holder |
| 4 | Filter bags |
| 5 | Dirty air import |
| 6 | Dust collection port |
| 7 | Rotate the feed opening |
| 8 | Venturi |
| 9 | Compressed air storage tank |
| 10 | Pressure switch |
| 11 | Diaphragm valve |
| 12 | Guided pneumatic containers |
| 13 | Solenoid Valve |
| 14 | The order controller |
| 15 | Differential Pressure Sensor Transmitter |
Solenoid pulse valve also called diaphragm valve, is the compressed air switch of the pulse bag filter soot blowing system, Under the control of the pulse control output signal, the filter bag row (room) blowing soot cleaning, keep the filter resistance in a set area, to ensure the processing capacity of dust collector and dust collecting efficiency.
Specifications of 2 1/2 Inch Pneumatic Pulse Jet Valve CA62T
1)Type: Right angle (vertical) & in line solenoid pulse valve.
2)Bore: 20, 25, 35, 40, 50, 62, 76, 100mm
3)Port Size; 3/4"~ 3"
4)Connection Form: Normal screw; A: Tubing+thread; S: Double diaphragm; DD: Pipe connecting; J: Threaded(economical type)
5)Working Pressure: 0.3~0.8MPa
6)Ambient Temperature: -5~55° C
7)Humidity < 85%
8)Applied Medium: Pure air
9)Diaphragm life: Above 1 million times
10)Voltage: DC24V, AC110V, AC220V
11)Reference type: CA20T, CA25T, CA45T, CA50T, CA62T, CA76T
Dimensions of Pulse Jet Valve CA62T:
Goyen Type Pulse Jet Valve 2 1/2" CA62T:
No Description Standard Material
1 Body, cover aluminium die cast ca313
2 Bleed pin Turned aluminium
3 Diaphragm Assembly Buna N, Buna N Rubber
4 Spring ss304
5 Screws ss304
6 o-rings Buna N, Nitrile
7 Plunger Assembly 430FR SS
8 Ferrule, Iron Top Assembly 305 stainless steel
9 Coil 130° rated nylon encapsulaton
10 Washer Pressed aluminium
11 Clip Mechanical plated steel
CA62T Pulse Valve Electrical Details:
Coil Voltage 200/240 vac, 100/120 vac, 24 vac, 24 vdc, 12vdc
Coil connection QR-DIN 43650A connection, QD conduct entry
Installations of Pulse Valve Goyen Type CA62T:
1. Prepare supply and blowtube pipes to suit valve specification. Avoid installing valves underneath the tank.
2. Ensure tank and pipes are free from dirt, rust or other particulate.
3. Ensure supply air is clean and dry.
4, Mount valves to inlet pipes and blowtube to valves, ensuring no excess thread sealant can enter the valve itself.
5. Make electrical connections to solenoid or connect RCA pilot port to pilot valve (RCA valves only).
6. Apply moderate pressure to system and check for installation leaks.
7. Fully pressurise system.
8. Test fire and listen for proper actuation and crisp pulse noise.
Contact Now
