RO System Electric Solenoid Coils

RO System Electric Solenoid Coils

This solenoid coil is generally used on machines such as pure water machines and water purifiers, and is controlled to open and close by a 24V DC control Solenoid Valve for RO water purifier wastewater control. The RO water valve composed of the solenoid coil and the plastic valve body is suitable for household appliances, industrial equipment, agricultural and forestry water, medical equipment and the like. Such as: washing machine, water dispenser, water heater, coffee machine, ice machine, dishwasher, industrial humidifier, large refrigeration equipment, air cooler, garden sprinkler irrigation, agricultural drip irrigation, greenhouse spray, washing machine, tooth cleaning machine. Solenoid Coil temperature rise: When the inlet valve is not in water, the coil is applied with rated voltage. After the temperature is stable, the coil temperature rises <70K.

Technical parameter of RO system electric Solenoid Valve Coils:

Main dimension of AC220V/DC24V Feed Water Solenoid Valve Coils:

Application of AC220V/DC24V/DC12V N/C Water Purifier Accessories Solenoid Coils:

100% testing of RO Reverse Osmosis Spare Part Solenoid Coils:

The electronic components Solenoid coils of the water purifier control the water purifier

There are a lot of electronic components in each water purifier. Today I am telling you a very important electronic component in the water purifier - the water inlet solenoid valve, let you know the main function of the water inlet solenoid valve. What is it, if there is a failure, what will happen. If you read this article, if you find that your water purifier has a similar fault in the future, then you will quickly find the problem and find the water purifier to repair it.

The water inlet solenoid valve, as its name implies, is used to control the water inlet of the water purifier. The water purifier should make water, open the switch of the water purifier, the solenoid valve will open automatically, the tap water can pass through the valve; if the water inside the pressure tank is full, the water inlet solenoid valve will be closed, the water source will be cut off.
Whether the influent electromagnetic valve stops working is reflected in the waste water, because if the water purifier is always working, there will always be wastewater outflow; if the water purifier stops working, the wastewater will stop.

Inlet water solenoid valve general classification:
Inlet water electromagnetic valves are classified into quick-connect, internal-threaded, external-threaded, and plug-in interfaces according to the interface. Among them, the quick-connect type is the most common, and the interface with 1/4'' and 3/8'' is more. The internal thread and the plunger type are also mostly 1/4'' interfaces; the external thread type is generally a 1/2'' external-tooth interface.

In addition, according to the voltage can also be classified: one is a 24 volt inlet solenoid valve; and the other is a 36 volt inlet solenoid valve. The diameter of the 3-point interface standard is 9.5mm, and the interface of 1/4'', the nozzle is directly 6.4mm.

The inlet valve of the water inlet solenoid valve has an average opening and closing time of more than 100,000 times. These are tested by water hammer. Under normal temperature conditions, under water pressure of 28~32kg. Continuously open and close the solenoid valve, each time interval of 5 to 10 seconds, no day and night without interruption, the test takes about 3 months.

Welcome to your inquiry!