Home > Products > Solenoid Valve > Brass Solenoid Valve > 2 Inch Golden Color Solenoid Valve 2W500-50

2 Inch Golden Color Solenoid Valve 2W500-50

Payment Type:
L/C,T/T,Paypal,Western Union
Incoterm:
FOB,CFR,CIF,EXW,FCA,CPT,CIP
Min. Order:
1 Piece/Pieces
Transportation:
Ocean,Land,Air
Port:
Ningbo,Shanghai,Tianjing
Share:
Chat Now
  • Product Description
Overview
Product Attributes

Model No.2W500-50

BrandOEM

BrandOther

CustomizedCustomized

CertificationOther

PowerPneumatic

PressureMedium Pressure

Work TemperatureNormal Temperature

MaterialBrass

Supply Ability & Additional Information

Packagingboxes,cartons,pallets

Productivity100000pcs per month

TransportationOcean,Land,Air

Place of OriginNingbo,China

Supply Ability100000pcs per month

CertificateCE.ISO

PortNingbo,Shanghai,Tianjing

Payment TypeL/C,T/T,Paypal,Western Union

IncotermFOB,CFR,CIF,EXW,FCA,CPT,CIP

Packaging & Delivery
Selling Units:
Piece/Pieces
Package Type:
boxes,cartons,pallets

2 Inch Golden Color Solenoid Valve 2W500-50 


Two position, two way, normal close switch, magnetic solenoid water valve.

Can be installed at any angle, but it is a good choice when the horizontal tube keep upward.

Used to control automatically the liquid and gas in the pipeline.


The pressure to start with straight moving diaphragm structure, expanded its use.

The flat diaphragm structure reliable opening and closing, and increase the service life of the product.

Choose laminate and coil can improve the safe usage of the product in many environments.

Replace the coil can be used for Explosion-Proof Solenoid Valve, explosion-proof level: Ex MB I/II T4


Specs and Descriptions

2W160-10

2W160-15

2W200-20

2W250-25

2W350-35

2W400-40

2W500-50

Port Size

G3/8

G1/2

G3/4

G1

G1-1/4

G1-1/2

G2

CV Value

4.8

4.8

7.6

12

24

29

48

Type

Normal Closed

Material of Body

Brass

Motion Pattern

Direct Drive

Working Temperature

-5~80℃

Working Pressure

Water/Oil:0~0.5Mpa Air/Gas:0~0.7Mpa

Material of Seal

NBR

Voltage and Way,Position

As your requirement

Liquid

Water Oil Gas Air

Coil

Conventional(Waterproof)

Sample of 2W500-50 
12  11



Dimension of 2W500-50

TZ

Straight view of valve removal

13



electromagnetic valve installation using:

1, before installation should refer to the instruction manual of the product, whether to meet your demand.

2, line should be rinsed clean before using, medium to clean the filters should be installed, and not to prevent impurities may not impair the normal work of the solenoid valve.

3, the electromagnetic valve is generally one-way work, can't reverse loading, the movement direction of the arrow on valve is line, must be consistent.

4, the electromagnetic valve installation general level of the valve body, vertical coil, and some products can be installed arbitrarily, but best vertical when conditions permit, to increase service life.

5, the electromagnetic valve in the frozen place to work shall be heat treated, or set the heat preservation measures.

6, the electromagnetic coil lead wire (connector) connection, should confirm whether firm, join electrical components contact should not shake, loose will cause electromagnetic valve does not work.

7, continuous production of solenoid valve, had better use the bypass, easy maintenance, does not affect production.

8, long after discontinuation of solenoid valve, should be no clear condensation rear can use. When unpick and wash all parts are to put away again restorable installed in sequence. 9, has the unclear place, please contact with little company, serve you wholeheartedly.

Second, the electromagnetic valve fault and eliminate:

(a) electromagnetic valve does not work after the power supply:

1, check the power supply wiring whether bad -) connectors and wiring connection again;

2, check whether the power supply voltage in the plus or minus working range --) to switch to normal position;

3, whether the ring sealing off -) to welding;

4, coil short circuit, replace the coil;

5, differential pressure is not appropriate to work -) -) or replacement of proportion adjustment pressure difference electromagnetic valve;

6, fluid temperature is too high -) change of proportion of electromagnetic valve;

7, have impurities to make electromagnetic valve of the main valve core and the moving core card die -) cleaning, such as seal damage the seal and install the filter should be changed;

8, the liquid viscosity is too large, high frequ


Any Question will be answered at once


Product Categories : Solenoid Valve > Brass Solenoid Valve

Home > Products > Solenoid Valve > Brass Solenoid Valve > 2 Inch Golden Color Solenoid Valve 2W500-50
Email to this supplier
  • *Subject:
  • *To:
    Mr. Brandon Bao
  • *Mobile:
  • *Email:
  • *Message:
    Your message must be between 20-8000 characters
Send Inquiry
*
*
*

Related Products List

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send