Home > Products > Dust Collector Pulse Valve > Pulse Jet Valve > Dust Pulse Jet Valve CA102MM

Dust Pulse Jet Valve CA102MM

Payment Type:
L/C,T/T,Paypal,Western Union
Incoterm:
FOB,CFR,CIF,EXW,FCA,CPT,CIP
Min. Order:
1 Piece/Pieces
Transportation:
Ocean,Land,Air
Port:
Ningbo,Shanghai,Tianjing
Share:
Chat Now
  • Product Description
Overview
Product Attributes

Model No.CA102MM

BrandBrando

CustomizedCustomized

CertificationCE

PowerPneumatic

PressureMedium Pressure

Work TemperatureNormal Temperature

MaterialAluminum

BrandBrando

Supply Ability & Additional Information

Packagingboxes,cartons,pallets

Productivity100000pcs per month

TransportationOcean,Land,Air

Place of OriginNingbo,China

Supply Ability100000pcs per month

CertificateCE.ISO

PortNingbo,Shanghai,Tianjing

Payment TypeL/C,T/T,Paypal,Western Union

IncotermFOB,CFR,CIF,EXW,FCA,CPT,CIP

Packaging & Delivery
Selling Units:
Piece/Pieces
Package Type:
boxes,cartons,pallets

Dust Pulse Jet Valve CA102MM

The plateau GOYEN type pulse MM valve is directly installed on the flange seat on the outer wall of the air bag, and the nozzle pipe crosses the air bag and is installed according to the plateau drawing
It is suitable for the dust remover, especially the reverse blowing pulse ash removal filter system, including all kinds of filter bags, filter cartridges, flat bags, ceramic tubes and metal fiber filter bags

Dust collector applications, inparticular for reverse pulse jet filtercleaning and its variations including bag filters, cartridge filters, envelope filters, ceramic filters, and sintered metal fibre filters.

Model No. CA102MM
Working Pressure

0.2-0.6Mpa

Ambient Temperature ﹣5-55℃
Relative Humidity <85%
Working Medium Clean Air,Dry Compressed Air
Voltage 24V DC,110V 220V AC
Diaphragm Life Injection 1 million or more
Orifice φ102

G102


9


10
Installation


1. MM valves are installed through the tank, refer to the appropriate template listed above.

 

2.To avoid any potential operational problems it is preferable that the valves are not mounted underneath the tank where condensation may collect. All o-rings should be coated with a silicone based lubricant or similar.

3.Dresser nut seals where used are a pressure seal only, not a structural component. Do not rely on dresser seals to retain either the tanks or blowtubes Tanks and blowtubes must be independently restrained.

4.Tighten dresser nuts to 20Nm (15 ftlbs) max.

5.Tighten pipe outlets to 20 Nm (15 ftlbs).

6.Connect to Goyen pilot valve, if remotely actuated.

7.Ensure compressed air supply is dry and free from oil and dirt.

8.Check all cleaning system components are secure before applying pressure.

9.Apply moderate pressure and check for leaks.

10.Fully pressurise system.

11.Test fire and listen for proper actuation and crisp pulse noises.


Common failures and fixes:
1, spring damage, pulse valve spool on the spring is easy to damage, resulting in the appearance of the pulse valve to blow air into the nozzle for a long time, the treatment is to replace the spring

2. The rubber pad is damaged. After a long period of use, the rubber pad on the spool of the pulse valve is easy to be damaged

3, spool fouling, because the air intake is not clean, resulting in fouling accumulation in the spool, resulting in the appearance of the nozzle is a long-term air intake or get electricity after the pulse valve does not move, the way is to clean the spool

4. The diaphragm is damaged. After long-term operation, the diaphragm is prone to fatigue and oxidation, etc., resulting in the appearance of long-term air release at the pressure relief port

5, throttle hole blocked or damaged, the intake is not clean easy to cause the throttle hole blocked, the appearance is the pulse valve to blow air to the nozzle for a long time, the treatment is to clean the throttle hole; The throttle hole is damaged or missing, which makes the throttle hole lose its interception function, resulting in abnormal pressure relief. The appearance is that the pulse valve has action after the power is received, and the pressure relief port releases air, but the pulse valve does not blow, and the treatment is to replace the throttle



Product Categories : Dust Collector Pulse Valve > Pulse Jet Valve

Home > Products > Dust Collector Pulse Valve > Pulse Jet Valve > Dust Pulse Jet Valve CA102MM
Email to this supplier
  • *Subject:
  • *To:
    Mr. Brandon Bao
  • *Mobile:
  • *Email:
  • *Message:
    Your message must be between 20-8000 characters
Send Inquiry
*
*
*

Related Products List

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send