Communicate with Supplier? Supplier
Brandon Bao Mr. Brandon Bao
What can I do for you?
Chat Now Contact Supplier
 Tel:86-0574-83879820 Email:brandon@brandopneumatic.com
Home > Products > Pulse Jet Valve > Pulse Valve SCG353A050 Used for Bag Dust Romover
Pulse Valve SCG353A050 Used for Bag Dust Romover
Pulse Valve SCG353A050 Used for Bag Dust Romover
Pulse Valve SCG353A050 Used for Bag Dust Romover
  • Pulse Valve SCG353A050 Used for Bag Dust Romover
  • Pulse Valve SCG353A050 Used for Bag Dust Romover
  • Pulse Valve SCG353A050 Used for Bag Dust Romover

Pulse Valve SCG353A050 Used for Bag Dust Romover

    Payment Type: L/C,T/T,Paypal,Western Union
    Incoterm: FOB,CFR,CIF,EXW,FCA,CPT,CIP
    Min. Order: 1 Piece/Pieces
    Delivery Time: 7 Days

Basic Info

Model No.: SCG353A050

Customized: Customized

Certification: ISO, CE

Power: Pneumatic

Pressure: Medium Pressure

Brand: Other, OEM

Work Temperature: Normal Temperature

Material: Aluminum

Additional Info

Packaging: boxes,cartons,pallets

Productivity: 100000pcs per month

Brand: OEM

Transportation: Ocean,Land,Air

Place of Origin: Ningbo,China

Supply Ability: 100000pcs per month

Certificate: CE.ISO

Port: Ningbo,Shanghai,Tianjing

Product Description

Pulse Valve SCG353A050 Used for Bag Dust Romover

Electromagnetic pulse valve: refers to the Electromagnetic Valve, pilot valve and pulse valve combine together,means the diaphragm valve directly by the electrical signal control.

It is to control the oil pressure in the oil circuit. Generally installed in the main oil circuit or shock absorber back pressure oil circuit, in order to reduce gear shift and lock unlock oil pressure impact, so that the operation of equipment to maintain a stable state.


The Drawings of SCG353A050

DTA-Z-50S

About our Company Outlook


1


Dust Collector Equipment

4


The Working Pressure of the SCG353A050

The diaphragm divides the electromagnetic pulse valve into the front and rear air Chambers. When the compressed air is connected to the rear air chamber through the throttle hole, the pressure in the rear air chamber will press the diaphragm tightly to the valve's output port and the electromagnetic pulse valve will be in the state of "closed". The electromagnetic pulse valve armature is reset when the electrical signal of the pulsed injection control instrument disappears. The vent hole of the rear air chamber is closed. The pressure of the rear air chamber increases, making the diaphragm close to the valve outlet.



Installation method
Check whether the components are damaged during transportation before use.
Clean up the sundries in the air supply pipeline before installation. Pay attention to the direction of gas flow and whether the nozzle is correct during installation.
All O - rings should be lubricated properly during installation.
There are three pins on the solenoid pulse valve coil, and it is equipped with a special plug. One of the pins with "" symbol is the ground pin, and the user can decide whether to ground or not according to needs. (in general, it is not grounded when the voltage is less than 36V, and it should be grounded when the voltage is greater than 36V.) The other two are coil power pins, which are respectively connected with the terminals corresponding to the sequence of the pulse injection controller and the terminals with the common line of the valve. Note whether the voltage meets the requirements.
The capacity of the air separator shall meet the requirements of providing stable air source for the electromagnetic pulse valve. The inner wall of the air separator shall be clean and free from rust and other sundries. The air separator shall be free from leakage and shall meet the requirements for safety.
The valve is connected to the gas bag and blowing tube seal suitable temperature for - 10 ℃ ~ 70 ℃. For high temperature seals, please specify when ordering.




Looking for ideal Pilot Pulse Valve Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Working Pressure 0.4 to 0.6MPa are quality guaranteed. We are China Origin Factory of Electromagnetic Dust Valve. If you have any question, please feel free to contact us.

Product Categories : Pulse Jet Valve

Email to this supplier
  • Mr. Brandon Bao
  • Your message must be between 20-8000 characters

Related Products list

Home

Phone

Skype

Inquiry