Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Model No.: 4V130-06
Brand: OEM
Brand: Other
Customized: Customized
Certification: Other
Power: Pneumatic
Pressure: Medium Pressure
Work Temperature: Normal Temperature
Material: Aluminum
Packaging: boxes,cartons,pallets
Productivity: 100000pcs per month
Transportation: Ocean,Land,Air
Place of Origin: Ningbo,China
Supply Ability: 100000pcs per month
Certificate: CE.ISO
Port: Ningbo,Shanghai,Tianjing
Payment Type: T/T,Paypal,Western Union
Incoterm: FOB,CFR,CIF,EXW
Thread Type Pneumatic Valve 4V130-06
Lubrication: No lubrication
Product Name | Pneumatic Solenoid Valve |
Model | 4V130-06 |
Type | 3 Position 5 Way |
Material | Aluminum Alloy |
Working Voltage | DC12V DC24V , AC110V AC220V |
Port Connection | Inlet=Outlet=Exhaust=G1/8'' |
Power Consumpation | AC:2.5VA DC:2.5W |
Insulation Grade | IP65 |
There are closed chambers in the pneumatic solenoid valve. There are through holes in different positions. Each hole of the pneumatic solenoid valve leads to different air pipes. The middle of the cavity is a valve. On both sides are two electromagnets. Which side of the magnet coil is energized. Which side the valve body will be attracted to;
The pneumatic solenoid valve blocks or leaks the holes of different exhaust gases by controlling the movement of the valve body, and the air inlet holes are normally open, the high-pressure gas enters different exhaust pipes, and then is pushed by the air pressure of the pneumatic solenoid valve. The piston of the cylinder controls the mechanical movement of the entire solenoid valve by controlling the current of the electromagnet of the pneumatic solenoid valve.
Routine maintenance
1. Inside and outside the valve body (including the variable speed transmission case), firstly, shot blasting should be used to remove rust, and the powder should be electrostatically sprayed with powder-like non-toxic epoxy resin, and the thickness is more than 0.3mm. When large-scale valves are difficult to electrostatically spray non-toxic epoxy resin, they should also be painted and sprayed with similar non-toxic epoxy paint.
2. The interior of the valve body and the various parts of the valve plate are required to be fully anti-corrosive. On the one hand, it will not rust when immersed in water, and no electrochemical corrosion will occur between the two metals. On the other hand, the smooth surface will reduce the water resistance. 6.3 The hygienic requirements for anti-corrosion epoxy resin or paint in the valve body shall have the test report of the corresponding authority. Chemical and physical properties should also meet the relevant requirements.
Product Categories : Pneumatic Valve > Pneumatic Solenoid Valve
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.