Home > Products > Dust Collector Pulse Valve > Pulse Jet Valve > ASCO Type Dust Collector Pulse Jet Valve 8353G001

ASCO Type Dust Collector Pulse Jet Valve 8353G001

Payment Type:
L/C,T/T,Paypal,Western Union
Incoterm:
FOB,CFR,CIF,EXW,FCA,CPT,CIP
Min. Order:
1 Piece/Pieces
Transportation:
Ocean,Land,Air
Port:
Ningbo,Shanghai,Tianjing
Share:
Chat Now
  • Product Description
Overview
Product Attributes

Model No.8353G001

BrandOEM

BrandOther

CustomizedCustomized

CertificationOther

PowerPneumatic

PressureMedium Pressure

Work TemperatureNormal Temperature

MaterialAluminum

Supply Ability & Additional Information

Packagingboxes,cartons,pallets

Productivity100000pcs per month

TransportationOcean,Land,Air

Place of OriginNingbo,China

Supply Ability100000pcs per month

CertificateCE.ISO

PortNingbo,Shanghai,Tianjing

Payment TypeL/C,T/T,Paypal,Western Union

IncotermFOB,CFR,CIF,EXW,FCA,CPT,CIP

Packaging & Delivery
Selling Units:
Piece/Pieces
Package Type:
boxes,cartons,pallets

Dust Pneumatic Valve 8353G001



Controlled by a pilot valve such as electromagnetic or pneumatic, it can open and close the diaphragm valve that generates the pulse at high pressure.

The pulse valve is the main component of the bag filter, which is sprayed more than 1 million times.The pulse valve is a valve that makes the input long signal become a pulse signal by the airflow through the air resistance and the delay of the air volume.




Body
Aluminum
Core tube
Stainless steel
Core and Plugnut
Stainless steel
Core Spring
Stainless steel
Sealing & disc
NBR(nitrile/buna-n)
Diaphragm
TPE(hytrel)
Shading coil
Copper
Connector
DIN43650A
Voltage
DC: 24V, AC: 110V, 220V
Working Temperature
-5 to 55 degree
Protection Class
IP65
Coil Insulation Class
F
Working Pressure
0.35-0.85Mpa

1556599047(1)


Drawings


8



1. When the pulse valve is not energized, the gas enters the decompression chamber through the constant pressure pipe of the upper and lower casings and the throttle hole therein.  

Since the valve core blocks the pressure relief hole under the action of the spring, the gas is not discharged. The pressure between the decompression chamber and the lower chamber is made uniform, and under the action of the spring, the diaphragm blocks the nozzle and the gas does not rush out.  

2. When the pulse valve is energized, the valve core is lifted up by the electromagnetic force, the pressure relief hole is opened,  

and the gas is ejected. Due to the action of the constant pressure pipe orifice, the outflow speed of the pressure relief hole is greater than that of the decompression chamber.  

The inflow velocity of the pressure tube gas causes the pressure in the decompression chamber to be lower than the pressure in the lower chamber, and the gas in the lower chamber lifts up the diaphragm, opens the nozzle, and performs gas injection




1. The spring is damaged. The spring on the pulse valve spool is easily damaged. The appearance is that the pulse valve is deflated to the blow port for a long time. The treatment method is to replace the spring.

2. The rubber pad is damaged. After the use time is long, the rubber pad on the pulse valve spool is easily damaged. The appearance is that the pulse valve is deflated to the blowing port for a long time. The treatment method is to replace the rubber pad.

3, the valve core dirt, because the intake air is not clean, causing the fouling of the valve core, resulting in the appearance of long-term intake of the nozzle or the pulse valve does not work after the power, the treatment method is to clean the valve core.

4, the diaphragm is damaged, after long-term work, the diaphragm is easy to fatigue, oxidation, etc., resulting in the appearance of long-term deflation of the pressure relief port, the pulse valve does not work, the treatment is to replace the diaphragm.  

5. The orifice is blocked or damaged. The intake air is not clean and the throttle hole is blocked. The appearance is that the pulse valve is deflated to the nozzle for a long time.  

The treatment method is to clean the orifice; the orifice is damaged or missing, and the orifice is made. Loss of interception, resulting in abnormal pressure relief,

the appearance is that the pulse valve has action after the power is turned on, the pressure relief port is deflated, but the pulse valve is not sprayed, the treatment method is to replace the orifice




If you have Any Question,Please Contact us without any hesitation!





Product Categories : Dust Collector Pulse Valve > Pulse Jet Valve

Home > Products > Dust Collector Pulse Valve > Pulse Jet Valve > ASCO Type Dust Collector Pulse Jet Valve 8353G001
Email to this supplier
  • *Subject:
  • *To:
    Mr. Brandon Bao
  • *Mobile:
  • *Email:
  • *Message:
    Your message must be between 20-8000 characters
Send Inquiry
*
*
*

Related Products List

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send