2-1/2 Inch Right Angle Solenoid Pulse Valve DMF-Z-62S
This Valve below is DMF-Z-62S BFEC Type solenoid Pulse Jet Valve.Body material aluminum alloy ,standard seal material defaults to Nitrile rubber.Valve body inlet and outlet at 90 ° Suitable For Dust collector applications, in particular for reverse pulse jet filter cleaning and its variations, including bag filters, cartridge filters and envelope filters, ceramic filters and sintered metal fibre filters. Connection method is thread.
The electromagnetic pulse valve is composed of pilot , diaphragm, and a valve body. The area of the back cavity of the diaphragm is larger than the area of the front cavity.
Specification
| Model Number | DMF-Z-62S |
| Brand | Brando |
| Port Size | 2-1/2'' |
| Number of Diaphragm | 2 |
| Body Material | Aluminum Alloy |
| Seal Material | NBR (Common), all Available |
| KV/CV | 129.26/150.85 |
| Temperature Range | -25℃ to +80℃ or customized
|
| Working Pressure | 0.1~0.8Mpa |
| Voltage | AC220V, AC110V, AC24V, DC24V
|
Dimension of DMF-Z-62S Solenoid Pulse Jet Valve
Material Construction
| Part Name | Material |
| Valve Body | Aluminum ADC12 |
| Aemature | 430FR Stainless Steel |
| Diaphragm & Seals | NBR (Common), all Available
|
| Coil | Copper Wire |
| Spring | 321 Stainless Steel |
Deconstruction of DMF-Z-62S Electromagnetic Pulse Valve For Dust Collector
Installation
1. Prepare supply and blowtube pipes to suit valve specification. Avoid installing valves underneath the tank.
2. Ensure tank and pipes are free from dirt, rust or other particulate.
3. Ensure supply air is clean and dry.
4. Mount valves to inlet pipes and blowtube to valves, ensuring no excess thread sealant can enter the valve itself.
5. Make electrical connections to solenoid
6. Apply moderate pressure to system and check for installation leaks.
7. Fully pressurise system.
8. Test fire and listen for proper actuation and crisp pulse noise.
Welcome to your any question and inquiry!
Contact Now
