Home > Products > Dust Collector Pulse Valve > ASCO Type Pulse Jet Valve > ASCO type 3/4'' Air Control Valve G353A041

ASCO type 3/4'' Air Control Valve G353A041

Payment Type:
L/C,T/T,Paypal,Money Gram,Western Union
Incoterm:
FOB,CFR,CIF,EXW,FCA,CPT,CIP
Min. Order:
1 Piece/Pieces
Transportation:
Ocean,Land,Air
Port:
Ningbo,Shanghai,Tianjing
Share:
Chat Now
  • Product Description
Overview
Product Attributes

Model No.G353A041

BrandOEM

MaterialAluminum

BrandOEM

CustomizedCustomized

UsageAir Compressor

Work TemperatureNormal Temperature

Supply Ability & Additional Information

Packagingboxes,cartons,pallets

Productivity100000pcs per month

TransportationOcean,Land,Air

Place of OriginNingbo,China

Supply Ability100000pcs per month

CertificateCE.ISO

PortNingbo,Shanghai,Tianjing

Payment TypeL/C,T/T,Paypal,Money Gram,Western Union

IncotermFOB,CFR,CIF,EXW,FCA,CPT,CIP

Packaging & Delivery
Selling Units:
Piece/Pieces
Package Type:
boxes,cartons,pallets

ASCO type 3/4'' Air Control Valve G353A041



The electromagnetic pulse valve is a key component of the pulse bag type dust collector. It is called the [heart" of the pulse bag type dust collector, and its performance directly affects the operation effect of the dust collector. Ensure the installation and commissioning of the pulse Solenoid Valve of the dust removal system can improve the purification efficiency of the bag filter, thereby improving the environment, preventing air pollution and providing environmental protection.


The electromagnetic pulse valve produced by our company is improved by introducing international advanced design technology. It is used for dust removal of compressed air switch of dust collector cleaning system. The components of key departments are imported materials, adopting threaded connection and reliable installation.


The working pressure of the electromagnetic pulse valve must be strictly controlled at 0.2Mpa~0.6MPa, and the requirements are relatively stable. Before the electromagnetic pulse valve is installed, the impurities in the air bag must be strictly cleaned; the compressed air must be strictly controlled to be a clean and dry gas source.



Model SCG353A043 SCG353A044 SCG353A047 SCG353A050 SCG353A051
Working pressure 0.3--0.8Mpa
Ambient temperature -5--55℃
Relative humidity <85%
Medium dry clean compressed air
Voltage 110V AC/ 220V AC/ 24V DC
Diaphragm woking life more than 1 million times
Nominal diameter φ20 φ25 φ40 φ50 φ62
Port thread G3/4" G1" G1 1/2" G2" G 2 1/2"


Supply the Practical photo of Diaphragm and its Drawings,guarantee the working life more than 1 million cycles


A25 Drawings of A25


Several advantages of our products


Several Advantages





Common problems and solutions for magnetic pulse valves:


First, the electromagnetic pulse valve in the installation, often problems and solutions:

1. Fault phenomenon: Some valves do not work, other valves are normal; Cause analysis: Check the valve connection and coil; Exclusion method: Replace the accessories.


2, failure phenomenon: all valves can not be opened, but the pilot part has action; cause analysis: check whether the air bag pressure is too low; exclusion method: check for air leakage.


3, failure phenomenon: some valves can not be closed and there is leakage; cause analysis: impurities are adsorbed on the diaphragm, the moving iron core has a stuck phenomenon; the elimination method: clean the diaphragm, check whether the diaphragm is complete, check the moving iron core And gas plugs.


4. Fault phenomenon: The solenoid valve is closed slowly; the cause analysis: the diaphragm orifice is blocked; the elimination method: dredge the diaphragm orifice.


5, failure phenomenon: all valves can not be closed, there is air leakage, air bag pressure can not be established; Cause analysis: 1, Y-type valve of the same air bag of several valves leaking gas caused by all the valve leakage artifact; 2, Z Type valve, the inlet of the valve is installed opposite to the blowing port; the corresponding troubleshooting method: 1. Check for air leakage; 2. Reinstall.





Characteristics


1.The aluminum alloy valve body adopts hot forging process, small volume and fine appearance.


2.The required components are all processed by CNC machine tools to ensure the accuracy and reliability of the pneumatic control pulse valve.


3.Introduce foreign advanced technology to innovate, catch up with imported gas-controlled pulse valve, and its performance has reached the international advanced level.


4.Using a novel and ingenious piston structure, the principle is more scientific, and the long life is more than ten times that of similar products.





If you have any interests,pls contact us without any hesitation



Product Categories : Dust Collector Pulse Valve > ASCO Type Pulse Jet Valve

Home > Products > Dust Collector Pulse Valve > ASCO Type Pulse Jet Valve > ASCO type 3/4'' Air Control Valve G353A041
Email to this supplier
  • *Subject:
  • *To:
    Mr. Brandon Bao
  • *Mobile:
  • *Email:
  • *Message:
    Your message must be between 20-8000 characters
Send Inquiry
*
*
*

Related Products List

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send