Home > Products > Solenoid Valve > Stainless Steel Solenoid Valve > 2S350-35 SUW-35 G1-1/4'' Water Solenoid Valve

2S350-35 SUW-35 G1-1/4'' Water Solenoid Valve

Payment Type:
L/C,T/T,Paypal,Western Union
Incoterm:
FOB,CFR,CIF
Min. Order:
1 Bag/Bags
Transportation:
Ocean,Land,Air
Port:
Ningbo,Shanghai,Guangzhou
Share:
Chat Now
  • Product Description
Overview
Product Attributes

Model No.2S350-35

BrandBrando

ApplicationIndustrial

Body MaterialStainless Steel

UsageFlow Control

BrandBrando

Working MediumAir, Water, Steam

Seal MaterialNBR Or VITON

Viscosity Limit20 CST Below

VoltageAC110V AC220V DC24V

Port SizeG1-1/4 Inch

Orifice Size35 Mm

Supply Ability & Additional Information

Packagingboxes,cartons,pallets

Productivity100000pcs per month

TransportationOcean,Land,Air

Place of OriginNingbo,China

Supply Ability100000pcs per month

CertificateCE

PortNingbo,Shanghai,Guangzhou

Payment TypeL/C,T/T,Paypal,Western Union

IncotermFOB,CFR,CIF

Packaging & Delivery
Selling Units:
Bag/Bags
Package Type:
boxes,cartons,pallets

2S350-35 SUW-35 G1-1/4'' Water Solenoid Valve

2S350-35:

2S : 2 Position 2 Way Solenoid Valve With Stainless Steel Body

350 : The Orifice Size is 35mm

35 : The Port Size is G1 1/4'' 

The 2S350-35 solenoid valve body is made of 304# stainless steel, widely use in the Pneumatic,water and oil circuit system to connect through or turn off the serving system.


Working principle of 2S series 2/2 Direct Lift Diaphragm Normally Closed Solenoid Valve: 


To open: when the valve receives an electrical signal, a magnetic field is formed which attracts the plunger covering the main orifice to lift off, causing system pressure to drop. 

As system pressure on the top of the diaphragm is reduced, full system pressure on the other side of the diaphragm acts to lift the diaphragm away from the main orifice, which allows media to flow through the valve. 

Since the bleed orifice is dimensionally smaller than the pilot orifice, the system pressure cannot rebuild on the top of the diaphragm as long as the pilot orifice remains open. 

When the system pressure is 0 PSI, the valve also can be operated.


To close: when the valve is de-energized, it releases its hold on the plunger. 

Then the plunger forced by the spring drops and covers the main orifice. 

The system pressure builds up on the top of the diaphragm through the bleed orifice, forcing the diaphragm down until it covers the main orifice and stops media flow through the valve. 

When the system pressure is 0 PSI, the valve still can be operated.

Specifications

Model 2S350-35
Working Medium Air , Water ,  Steam 
Operation Direct Acting
Type Normal Close
Orifice Size 35 mm
Port Size G1 1/4'' 
CV value(m3/h) 24
Operation Fluid Viscosity 20 CST Below
Operating Pressure 0~7kgf/cm2
Operating Temperature -5~80℃
Voltage Range +-10%
Special Vlotages and Special Specifications, Please Contant Us.


Overall Dimension Drawing:
Overall Dimension Drawing:

Deconstruction diagram of 2S350-35:

Deconstruction diagram of 2S350-35

Details 

DETAILS

How TO Choose Solenoid Valve

1.According to the pipeline parameters: diameter specification (DN), Connection Way

(1). Determine the diameter (DN) size according to the inner diameter or flow requirement of the pipeline;
(2). Connection Way, generally >DN50 should select flange interface, ≤DN50 can be freely selected according to user needs.


2. Select the solenoid valve according to the fluid parameters: material, temperature
1). Corrosive fluid: Corrosion-resistant solenoid valve and all stainless steel should be used; edible ultra-clean fluid: food grade Stainless Steel Solenoid Valve should be used;
2). High temperature fluid: It is necessary to select a solenoid valve made of high temperature resistant electrical materials and sealing materials, and it is necessary to select a piston type structure;
3). Fluid state: large to a gaseous state, liquid or mixed state, especially when the diameter is larger than DN25, it must be distinguished;
4). Fluid viscosity: Usually it can be arbitrarily selected below 50cSt. If it exceeds this value, a high viscosity solenoid valve should be used.


3.
Selection of solenoid valves based on pressure parameters: principle and structure

1) Nominal pressure: This parameter has the same meaning as other general-purpose valves, and is determined according to the nominal pressure of the pipeline;
2) Working pressure: If the working pressure is low, the direct-acting or step-by-step direct-acting principle must be used; when the minimum working pressure difference is above 0.04Mpa, direct-acting, step-by-step direct-acting or pilot-operated can be used.

4. electrical selection: voltage specifications should be preferred to use AC220V, DC24 is more convenient.


5.  according to the length of continuous working time to choose: normally closed, normally open, or sustainable power
1) When the solenoid valve needs to be opened for a long time, and the duration is longer than the closing time, the normally open type should be selected;
2) If the opening time is short or the opening and closing time is not much, then the normally closed type is selected;
3) However, some working conditions for safety protection, such as furnace and kiln flame monitoring, can not be selected for normal opening, and should be selected for long-term energization type.

6. Select auxiliary functions according to environmental requirements: explosion-proof, non-return, manual, waterproof fog, water shower, diving.

Focus on your demands, Offer you best solution: 
√ Contact us if some points you have doubt 
√ Contact us if somewhere need to change 
√ Contact us if not the one you are looking for 
√ Contact us if you are doing designing


Welcome to your inquiry!

Product Categories : Solenoid Valve > Stainless Steel Solenoid Valve

Home > Products > Solenoid Valve > Stainless Steel Solenoid Valve > 2S350-35 SUW-35 G1-1/4'' Water Solenoid Valve
Email to this supplier
  • *Subject:
  • *To:
    Mr. Brandon Bao
  • *Mobile:
  • *Email:
  • *Message:
    Your message must be between 20-8000 characters
Send Inquiry
*
*
*

Related Products List

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send