Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Model No.: 2S500-50
Brand: Brando
Application: Industrial
Body Material: Stainless Steel
Usage: Flow Control
Brand: Brando
Working Medium: Air, Water, Steam
Seal Material: NBR Or VITON
Port Size: G3/4 Inch
Orifice Size: 20 Mm
Viscosity Limit: 20 CST Below
Voltage: AC110V AC220V DC24V
Packaging: boxes,cartons,pallets
Productivity: 100000pcs per month
Transportation: Ocean,Land,Air
Place of Origin: Ningbo,China
Supply Ability: 100000pcs per month
Certificate: CE
Port: Ningbo,Shanghai,Guangzhou
Payment Type: L/C,T/T,Paypal,Western Union
Incoterm: FOB,CFR,CIF
2S500-50 SUW-50 2'' ELectric Flow Control Valve
This valve is a two-way, normally closed, direct-lift valve and does not require a minimum differential pressure to operate. As shown in the diagrams below, when the coil is de-energized, the plunger and flexible diaphragm sit on the main valve orifice. The working medium flows through a tiny "bleed orifice" and pressurizes the cavity above the diaphragm - this system pressure, along with the spring force, seals the valve. When the valve is energized, the diaphragm is pulled away from the main orifice, allowing fluid to flow through the valve. Since the bleed orifice is dimensionally smaller than the main orifice, the system pressure cannot rebuilt on the top of the diaphragm as long as the main orifice remains open.
Overall dimension of 2'' Stainless Steel Water Solenoid Valves Normally Closed:
Details enlargement of Uni-D Type SUW-50 2 Way NC Electric Water Valve:
Technical data of 2S, SUS, SUW Series Normally Closed Solenoid Valves:
Brando No | 2S025-06 | 2S025-08 | 2S040-10 | 2S160-10 | 2S160-15 | 2S200-20 | 2S250-25 | 2S350-35 | 2S400-40 | 2S500-50 |
Ref. No | SUS-6 | SUS-8 | SUS-10 | SUW-10 | SUW-15 | SUW-20 | SUW-25 | SUW-35 | SUW-40 | SUW-50 |
Working medium | Air, Inert Gas, Liquid, Vacuum | |||||||||
Valve type | 2/2 way, normally closed (NC) | |||||||||
Body material | Stainless steel 304 | |||||||||
Wetted Surface | Valve Body: Stainless Steel Seals: NBR (Buna); Option: Viton (FKM) Armature Assembly: Stainless Steel | |||||||||
Operation | Direct Acting, Uni-Directional, Zero Differential | |||||||||
Port size | 1/8'' | 1/4'' | 3/8'' | 3/8'' | 1/2'' | 3/4'' | 1'' | 1 1/4'' | 1 1/2'' | 2'' |
Operating pressure | 0 to 101 PSI / 0-0.7 Mpa (for Air, Water); 0 to 72 PSI / 0-0.5 Mpa (for Oil) | |||||||||
Operating temperature | Media: -5 to 80°C (NBR Seal), -5 to 120°C (Viton Seal); Ambient: -5 to 45°C | |||||||||
Fluid viscosity | Below 20cst |
ALL standard valves are supplied with Continuous Duty Coils of the proper class of insulation for the service indicated on the valve. It is normal for the coil temperature may become hot after being energized for extended periods. Smoke or burning odor indicates excessive coil temperature and the power should be disconnected to the coil immediately.
CAUTION: Do not energize the solenoid coil when it is not installed onto the valve. It may cause it to overheat and create a fire hazard.
SERVICE LIFE: The service life of the Solenoid Valve depends on the operating conditions such as pressure, temperature, type of medium, and the voltage.
CAUTIONS of using 2s500-50 Solenoid Valve:
1.Before pipelining, the pipe line must be very clean without any contaminants or any other things not ought to be existed.To prolong the life time of the product, filter should be installed in the front end of solenoid valve.
2.AC voltage tolerance:±10%;DC voltage tolerance:±1%
3.It should be installed horizontally;vertical installation is not advisable.
4.Fluid status changes with temperature Not recommended.Liquid status when it is high temperature;solid status when it is cool. Because the Body Material is Brass, Not Suitalbe For Corrosive Fluid. And Viscosity over 20CST is not Suitable.
5.This Solenoid Valve is unidirectional .The installation should follow the instructions of “→”.
6.When the solenoid valve is faulty, in order to isolate the solenoid valve in time and ensure the normal operation of the system, it is better to install a bypass device.
Product Categories : Solenoid Valve > Stainless Steel Solenoid Valve
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.