Home > Products > Solenoid Valve Coil > Solenoid Valve Coils > K23D-1.2T DIN4.8 Pneumatic Solenoid Coil

K23D-1.2T DIN4.8 Pneumatic Solenoid Coil

Payment Type:
L/C,T/T,Paypal,Money Gram,Western Union
Incoterm:
FOB,CFR,CIF,EXW
Min. Order:
1 Piece/Pieces
Transportation:
Ocean,Land,Air
Port:
Shanghai,Ningbo,Guangzhou
Share:
Chat Now
  • Product Description
Overview
Product Attributes

Model No.BB11532502

BrandBrando

Weight114 G

NamePneumatic Solenoid Coil

Reference NumberK23D-1.2T

ConnectionDIN4.8

VoltagesDC12V/DC24V/AC110V/AC220V

PowerAC:10VA, DC:7W 12W

InsulationB, F

ApplicationK23D/K25D/K35D Mini Pilot Pneumatic Solenoid Valve

Hole11 Mm

Height32.5 Mm

Supply Ability & Additional Information

PackagingBoxes, Carton, Pallet

Productivity450000 pcs per month

TransportationOcean,Land,Air

Place of OriginChina Ningbo

Supply Ability110000 pcs per week

CertificateCE

PortShanghai,Ningbo,Guangzhou

Payment TypeL/C,T/T,Paypal,Money Gram,Western Union

IncotermFOB,CFR,CIF,EXW

Packaging & Delivery
Selling Units:
Piece/Pieces
Package Type:
Boxes, Carton, Pallet

K23D-1.2T DIN4.8 Pneumatic Solenoid Coil


This K23D-1.2T DIN4.8 Pneumatic Solenoid Coil is suitable for the K23D series two-position three-way Pneumatic Solenoid Valve. The K23D series miniature Solenoid Valve is the basic component in the pneumatic transmission system. It is often used as the pilot control of the large-volume reversing valve. It is also called the electromagnetic pilot valve. It can also directly control the actuator with low air consumption. The quality of the coil determines the performance of the reversing valve.

1. Commutation performance
Under the specified working conditions, can the solenoid valve be reliably reversible after being energized, and can be reliably reset after the power is turned off.


2. Commutation and reset time
The time required from the energization of the electromagnet to the end of the spool reversal, the reset time is the time from the electromagnetic de-energization to the return of the spool to the initial position.


3. Commutation frequency
The maximum number of commutations allowed per unit of time.


4. Service life
Solenoid valves are used to damage major components, failing to perform normal commutation and resetting operations, or using the number of commutations that their main performance indicators have significantly deteriorated beyond the specified specifications.


Technical parameter of K23D-1.2T DIN4.8 Pneumatic Solenoid Coils:

Model BB11532502
Normal voltage DC12V/DC24V/AC110V/AC220V
Normal power AC:10VA, DC:7W 12W
Insulation class B, F
Connection type DIN 4.8
Application K23D/K25D/K35D Mini Pilot Pneumatic Solenoid Valve
Weight 114 g
Hole size 11 mm
Height 32.5 mm
Width 32 mm

Overall dimension of K23D/K25D/K35D Mini Solenoid Valve Coils:

Overall dimension of K23D/K25D/K35D Mini Solenoid Valve Coil

Different sizes of DC24V/12Voltage Pilot Pneumatic Valve Coil:

Different sizes of DC24V/12Voltage Pilot Pneumatic Valve Coil

Different sizes of DC24V/12Voltage Pilot Pneumatic Valve Coil


Production of AC110V/220V K23D Series Electromagnetic Coils:

Production of AC110V/220V K23D Series Electromagnetic Coils


Reversing valve malfunction
1. The reversing valve does not move.
Cause: The air source pressure is insufficient; the actuator is faulty; there is foreign matter in the valve; the valve internals at high temperature are stuck.
Solution: Check the air supply, restore the pressure; check the spring force of the actuator and the spring breakage and the diaphragm is damaged (Pneumatic Valve); check the signal; disassemble the valve, check and repair.


2. Inverted valve stroke is insufficient
Cause: The positioner is not calibrated and the stroke is not adjusted properly; the actuator spring rating is too small; there is foreign matter in the valve.
Solution: Re-adjust the positioner; adjust the spring; remove the valve to remove foreign objects.


3. The reversing valve is slow
Cause: The packing is too tight or the packing deteriorates; the valve stem is not straight, misaligned, causing large friction; the pressure of the air source is small.
Solution: Restore the supply air pressure; replace the repaired packing or stem.


Reversing valve leakage
1. The valve is leaking and the stem length is not suitable.


The reason for the leakage inside the valve: the air opening valve, the valve stem is too long and the valve stem is too short, the distance of the valve stem is up (or down) is not enough, causing a gap between the valve core and the valve seat, which cannot be fully contacted, resulting in closing Not strict and leaking.


Solution: The valve stem should be shortened (or extended) so that the stem length is appropriate so that it is no longer leaking.


2. Filler leakage


Reasons for filler leakage:
(1) The packing is in close contact with the valve stem after loading the stuffing box, but the contact is not very uniform, some parts are loosely contacted, some parts are tightly contacted, and some parts are not in contact.
(2) There is relative movement between the valve stem and the packing. As the medium with high temperature and high pressure and strong permeability is affected, the packing leaks.
(3) The contact pressure of the filler is gradually attenuated, and the medium itself leaks from the gap due to the filler itself.


Solutions:
(1) In order to facilitate the filling of the packing, the top of the stuffing box is chamfered, and a metal guard ring with a small erosion-resistant gap is placed at the bottom of the stuffing box to prevent the packing from being washed by the medium.
(2) The contact surface of the stuffing box and the filler should be smooth to reduce the wear of the filler.
(3) Flexible graphite is selected as the filler, which has the characteristics of good air tightness, small friction, small deformation, and no change in friction after retightening.


Welcome to your inquiry!

Product Categories : Solenoid Valve Coil > Solenoid Valve Coils

Home > Products > Solenoid Valve Coil > Solenoid Valve Coils > K23D-1.2T DIN4.8 Pneumatic Solenoid Coil
Email to this supplier
  • *Subject:
  • *To:
    Mr. Brandon Bao
  • *Mobile:
  • *Email:
  • *Message:
    Your message must be between 20-8000 characters
Send Inquiry
*
*
*

Related Products List

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send