Home > Products > Solenoid Valve > Brass Solenoid Valve > Solenoid Diaphragm for 2W200 Series Water Treatment Valve

Solenoid Diaphragm for 2W200 Series Water Treatment Valve

Payment Type:
L/C,T/T,Paypal,Money Gram,Western Union
Incoterm:
FOB,CFR,CIF,EXW,FCA,CPT,CIP
Min. Order:
1 Piece/Pieces
Transportation:
Ocean,Land,Air
Port:
Ningbo,Shanghai,Tianjing
Share:
Chat Now
  • Product Description
Overview
Product Attributes

Model No.2W200

BrandOEM

MaterialNBR

CustomizedCustomized

TypeMetal Joint

Work TemperatureNormal Temperature

Supply Ability & Additional Information

PackagingPVC bag, inner box, carton, than packed by pallet; also can be packed by color card and can be customized

Productivity100000pcs per month

TransportationOcean,Land,Air

Place of OriginNingbo,China

Supply Ability100000pcs per month

CertificateCE.ISO

PortNingbo,Shanghai,Tianjing

Payment TypeL/C,T/T,Paypal,Money Gram,Western Union

IncotermFOB,CFR,CIF,EXW,FCA,CPT,CIP

Packaging & Delivery
Selling Units:
Piece/Pieces
Package Type:
PVC bag, inner box, carton, than packed by pallet; also can be packed by color card and can be customized

Solenoid Diaphragm for 2W200 Series Water Treatment Valve


Water Solenoid Valve has closed cavity, in a different location to open a hole, each hole leads to different tubing, cavity valve is among, both sides are two electromagnets, which face the magnet coil electricity body will be attracted to which side, by controlling the movement of the valve body blocked or leakage of different discharge of oil hole, and the oil hole is always open, hydraulic fluid will enter the different oil drain, and then through the oil pressure to push the cylinder piston, piston drives the piston rod, piston rod drive mechanism. This controls the mechanical motion by controlling the current in the electromagnet.


Water electromagnetic valve is suitable for water or liquid as working medium, can automatically control or remote control water, oil, liquid and other working medium pipeline on and off. Because this valve USES the rubber seal, therefore greatly reduces to the working medium cleanliness, has the open and close signal speed, the reliability high characteristic.


Diaphragm is the essential part in the solenoid water valve.It is well known that the diaphragm of Solenoid Valve determines the working efficiency and service life of the valve. The choice of a good diaphragm will improve the working efficiency of the solenoid valve and reduce the cost.

Each diaphragm has a small hole, a small pressure regulating hole. When installing the diaphragm, please pay attention to the hole must be aligned with the direction of the water inlet, installation error valve will appear leakage or closed die other phenomena, affecting the normal use of the solenoid valve.


Model 2w200-20 water Valve Diaphragm
Center distance φ60.5
Outside diameter /
Hole number for mounting 4
Working temperature -20℃--80℃
Working pressure 0.2Mpa-0.6Mpa
Working medium Water, Clean Air
Diaphragm working life More than 1 million cycles

The practical sample picture and drawings of 2W200 series Solenoid Water Valve Diaphragm
10 TZ


Installation in Water Solenoid Valve

12 



Brass Solenoid Valve installation notes


1, brass solenoid valve installation should pay attention to the arrow on the valve body should be consistent with the flow direction of the medium. Do not install in a place where there is direct dripping or splashing water. Brass solenoid valves shall be installed vertically upward.

2, brass solenoid valve should ensure that the power supply voltage is 15%-10% of the rated voltage fluctuation range of normal work.

3. After installation of brass solenoid valve, there shall be no reverse pressure difference in the pipeline. And need to be electrified several times, make it suitable for the temperature before the formal use.

4, brass solenoid valve should be thoroughly cleaned before installation. The medium should be free of impurities. Install filter before valve.

5, when the brass solenoid valve failure or cleaning, in order to ensure the system continues to operate, should be installed bypass device.



Brass solenoid valve Installation steps:

1.The threaded interface around the ribbons

2.According to the direction of access to the solenoid valve

3.According to the standard access power supply

4.Detection of sealing and circuit



If you want to know more knowledge,feel free to contact us


Product Categories : Solenoid Valve > Brass Solenoid Valve

Home > Products > Solenoid Valve > Brass Solenoid Valve > Solenoid Diaphragm for 2W200 Series Water Treatment Valve
Email to this supplier
  • *Subject:
  • *To:
    Mr. Brandon Bao
  • *Mobile:
  • *Email:
  • *Message:
    Your message must be between 20-8000 characters
Send Inquiry
*
*
*

Related Products List

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send