2S160-15 SUW-15 1/2'' Air Water Solenoid Valve

2S160-15 SUW-15 1/2'' Air Water Solenoid Valve 

The valve is a two position two way Solenoid Valve, the structure of which is mainly composed of a pilot valve and a main valve, and the main valve adopts a rubber sealing structure.

The 2s series normally closed solenoid valve is made of stainless steel and is more durable. Suitable for air, compressed air, water, oil and other media, low noise, high reliability, can work normally in extreme environments.

2S160-15

2S: 2 Position 2 Way Direct Drive Solenoid Valve With Stainless Steel Body

160: The Orifice Size of 2S160-15 Solenoid Valve is 16 mm

15: The Port Size of 2S160-15 Solenoid Valve is G 1/2''

As a sprinkler irrigation system control device, the 2S160-15 water solenoid valve has the characteristics of stable operation, long service life and no harsh requirements on the working environment. It is widely used in farmland irrigation. High-performance solenoid valves are critical to the cost control of farmland irrigation and the safe and reliable operation of the system.

Technical data:

Detail enlargement of 2S160-15 water solenoid valves:

Application of 2S160-15 water solenoid valves:

Brief description of agricultural irrigation 2S160-15 water solenoid valve:

With the gradual popularization of agricultural automatic irrigation, the use of self-maintaining solenoid valves is becoming more and more common. The principle of irrigation is to collect soil moisture data through soil moisture sensor and then transmit it to the irrigation control host. The host automatically analyzes the collected data. If the humidity is not enough, open the solenoid valve for irrigation; When humidity is reached, the solenoid is turned off. Valve, stop flushing. Automatic control system is generally composed of control panel, humidity sensor and self - retaining solenoid valve.

1. Solenoid valve adopts self-locking mode, which can work normally without long-term power supply;

2. Controlled irrigation of soil water is adopted to achieve high-precision and fully automatic working mode, greatly reducing labor cost;

3. The irrigation cycle can be automatically edited to avoid damage to crops caused by improper irrigation at inappropriate time.

Installation Precautions

1. Please refer to the user manual of the product before installation to see whether it meets your requirements.
2. The pipe line must be clean without any contaminants or any other things not ought to be existed. To prolong the life time of the product, filter should be installed in the front end of solenoid valve.
3.The solenoid valve generally works in one direction and cannot be installed in reverse. The arrow on the valve Body is the movement direction of pipeline fluid and must be consistent.
4.Solenoid valve installation of the general body horizontal, vertical upward coil, some products can be arbitrarily installed, but when conditions allow the best vertical, in order to increase the service life.
5. To continuous production work of the solenoid valve, the best use of bypass, easy maintenance, do not affect production.

√ Contact us if you are doing designing

Welcome to your inquiry!